Alexx757 @ 14.3.2012, 18:43
Всем привет!
Вот стал обладателем Приуса 20-ки США, и как тут же столкнулся с проблемой!
При заводе машины загораются Восклиц. знак в красном треугольнике + Оринжевенький воскл знак в скобках (!) + VSC и машина не заводит бензиновый двигатель, сегодня поехал на сканер, он выдал ошибки P0A4B и C1310, подскажите что с моей машиной, что сломалось?
что самое интересное, она иногда всетаки заводится и готрит только Воскл.знак в красном треугольнике! (такое бывает когда поездишь по гравийке или п кочкам)....
P0A4B-253Detection Item DTC Detection Generator Position Sensor Circuit
Condition Interphase short in generator resolver circuit
Trouble Area- Wire harness or connector
- Hybrid vehicle generator
- HV control ECU
DESCRIPTIONThe generator resolver detects the position of the magnetic poles, which are indispensable for ensuring
the highly efficient control of the MG1 and MG2. The construction of the generator resolver and how it is
connected to the HV control ECU are the same as those of the motor resolver (see page HV-200).
DTC
C1310/51 Malfunction in HV system
DESCRIPTIONThe skid control ECU communicates with the hybrid control ECU and controls braking force according to
the motor's regenerative force.
The skid control ECU sends Enhanced VSC signal to the hybrid control ECU and inputs operating signal
from the hybrid control ECU.
The skid control ECU uses CAN communication for communication with the hybrid control ECU. If a
communication malfunction is memorized, the skid control ECU prohibits Enhanced VSC operation and a
part of ECB control by fail-safe function.
C1259/59 is stored if the power switch is ON (READY) with the HV battery service plug disconnected.
==============
DTC No. C1310/51
INF Code 156
DTC Detection ConditionThe traction control prohibition signal is received for at least 0.07 sec. when IG2 terminal voltage is 10.5 V or more for at least 1.5 sec. and communication with hybrid control ECU is valid.
Trouble AreaHybrid control system
(Enhanced VSC)